Concrete Roof Insulation (PRMA)

Foamular Extruded Polystyrene (XPS) Insulation is placed directly over the concrete roof's waterproof membrane, providing protection for the membrane but also creating a continuous thermal barrier on the roof.

 

Cold Storage Floor Insulation

Cold Storage is one of the most extreme environments insulation can be exposed to as there is extreme cold and massive amounts of moisture from condensation plus the extreme pressure from stored products.

 

Insulated Concrete Sandwich Panel Wall System

Typical concrete tilt wall panels must be insulated after casting and installation. Using XPS insulation and connector ties the panel is insulated during casting, prior to erection. Thus, the insulation is integral to the wall which results in easier and faster construction.

 

Masonry/Brick Wall Insulation

Masonry and brick are very good at storing heat but they are also very good at transferring heat. XPS acts as a barrier, limiting this transfer, reducing the need for artificial air-conditioning and reducing energy consumption.

 

Lightweight Construction – EIFS

Using XPS as an external insulation for your lightweight construction needs is up to 30% more efficient than between stud insulation. Foamular is fixed directly to the studs providing a continuous thermal barrier around your home.

 

Green Roof Garden Insulation

Green Garden Roofs will provide some insulation from the soil and plants but for adequate R-values added insulation is needed. Extruded Polystyrene is placed below the soil but above the concrete roof, creating a continuous thermal barrier.

 

On Ground Slabs With Floor Heating Systems

On-ground slabs with in-slab heating systems are a healthy and efficient way to heat a house. Unfortunately the cold ground the slabs sit on and cool air around it draw much of the heat out of the slab so the system has to work harder and longer to maintain the temperatures. Foamular limits these temperature fluctuations meaning that you can keep operating costs and emissions low.

 

Wine Cellar and Wine Storage Insulation

Successful wine storage requires constant temperature and high humidity which creates some unique problems for insulation. Most insulation would under-perform in these conditions but Foamular is not affected by moisture in the air so it is ideal for these unique circumstances.

 

Model Making Foam

Extruded Polystyrene has been used extensively for model making including model railways, model boats, surf boards, architectural modelling, sculptures, and tabletop games like Warhammer.